Chaffoteaux & Maury MINIMA MX2 30 FF NG - 16 FITTING THE CASING

27
Fig. 35
Fitting the casing
Remove the protective film on the casing:
- offer the casing up (Fig. 34)
- engage hooks
N on the casing in notches R (operation 1)
- fit the top of the panel in place
- close the panel mounting clamps (Fig. 35)
- screw in the clamp locking bolt
A
Note: it is essential to refit the locking bolt A
16
Fitting the Casing
1
A
N
Fig. 34
R