Chaffoteaux & Maury MINIMA MX2 30 FF NG - 22.2 ACCESS TO THE COMBUSTION CHAMBER; 22.2.1 Removing the combustion chamber front panel; 22.2.2 Removing the burner manifold

32
22.2.1 Removing the combustion chamber front panel
1. Carry out step 22.1.1;
2. Unscrew five self tapping screws “D” to release
the combustion chamber front panel and lift clear
(for the 24kW see Fig. 46a, for the 30kW see Fig. 46b);
3. Reassemble in reverse order.
1. Carry out step 22.1.1 and 22.2.1;
2. Unscrew the nut between manifold and gas pipe
(see Fig. 47).
3. Unscrew the 4 screws “E” securing the burner
and lift clear (see Fig. 48).
4. Reassemble in reverse order
22.2.2 Removing the burner manifold
22.2 Access to the Combustion Chamber
E
D
24 kW
30 kW
D
Fig. 46a
Fig. 47
Fig. 46b
Fig. 48
Fig. 46c