Chainway CP30 - Chapter 2 Specifications

CP30 User Manual
10
Chapter 2 Specifications
（2/1）
Item
Parameter
Printing
Printing Method Thermal transfer
Resolution 203dpi(8dot/mm),300dpi
（
12dot/mm
）
Max Printing Speed
200mm/s
（
203dpi
）
,150mm/s
（
300dpi
），
non electronic label read/write
area only
Max Printing Width 108mm(203dpi),106mm(300dpi)
Max Printing Length 2,286mm(203dpi),1,524mm(300dpi)
Memory
RAM 128 MB
Flash 256 MB
Programming Language ZPL-II, EPL-II, DPL
，
TSPL
Detection Sensor
RF LabelSensor,Paper-out-of Sensor,Gap Label Sensor,Black Mark Label
Sensor
Media
Electronic label
(UHF RFID), working frequency: 860-928MHz
Support EPC C1G2(ISO18000-6C) standard protocol
Types Folding or cutting or punched hole or black mark electronic label paper
Width 1 inch(25.4mm) – 4.72inches(120mm)
Height 0.0787 inch(20mm)– 9.84 inches(250mm)
Thickness 60μm – 250μm
Label Roll Diameter Max 5 inches(127mm)
Core Diameter 0.5 inch
（
12.7mm
），
1 inch
（
25.4mm
），
1.5 inches(38mm)
Ribbon
Type Wax,Wax/Resin,Resin
Width 1.18 inches(30mm) – 4.33 inches(110mm)
Length Max 984 feet(300m)
Core Diameter 1 foot(25.4mm)
Software
Label Design
Software
Seagull BarTender Ultralite
Driver Windows Vista7,8,10, Server 2012/2016/2018
Resident Fonts
Bitmap fonts
6, 8, 12, 16, 32, OCR A & B. 90°, 180°, 270° rotatable and 10
times expandable in horizontal and vertical directions
TTF fonts CG Triumvirate™ Vector font, Simplified Chinese