CP30 User Manual
Note: Violating following instructions may cause slight damage of the appliance.
1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking following
measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
2) Install the printer on the stable surface.
• If the printer falls, it can be broken and you will hurt yourself.
3）
Use the approved accessories only and do not try to disassemble, repair or remodel it by yourself.
• Call your dealer when you need these services.
4）Do not let water or other foreign objects drop into the printer.
• If this happened, switch off and unplug the printer before calling your dealer.
5) Do not use the printer when it is out of order. This can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
6）
Other considerations:
Leave enough space around printer for operation and maintenance.
The printer should be kept away from water and avoid direct sunlight, strong light and heat
source.
Do not use and store the printer in places with high temperature, high humidity and serious
pollution.
Avoid placing the printer in a place with vibration and impact.
Connect the printer's power adapter to a suitable grounding socket to avoid using the same
socket with large motors or equipment that can cause power voltage fluctuations.
If you do not use the printer for a long time, disconnect the power from the printer power
adapter.
In order to ensure the printing quality and product life, it is recommended to use paper of
recommended or equivalent quality.
To Next Page
Loading...