Chainway CP30 - Page 87

CP30 User Manual
83
Default Gateway Default:10.0.3.1
Subnet Mask Default:255.255.255.0
Wireless Setup
Bluetooth Switch
OFF (Default)
ON
SPP Pairing Code Default:0000
WiFi SSID
CP30 (varies with
different printers)
WiFi Switch
OFF (Default)
ON
Networking Mode
AP Mode (Default)
Station Mode
Ext.Device
Keyboard
None (Default)
USB Host
RS232
Keyboard Language
English (Default)
Spanish
Portuguese
France
German
Ukrainian
Barcode Scanner
None (Default)
USB Host
RS232
Testing
TPH Printed Mileage
Show the mileages
printer has printed
TPH Bad Not Printing Test Print the testing page
Label Calibration Calibrate the label
Media Sensor Printing
Dump Mode Receive the data
Cutting Test Test the cutter
Restore Factory Default
Enter
Cancel (Default)
Firmware Update
Touch Screen Calibration
Config Info
Printer Configuration
Print the information of
printer’s current settings
Internal Font List
Print all the internal
fonts template
Barcode Lists
Print all the barcodes
template
Internal Flash File List
Print the internal flash
file list