18
• Before any work on the machine itself remove the mains plug from the mains
socket .
• For safe and proper working operation, always keep the machine and ventilation
slots clean.
• Regularly check to see if any dust or foreign matter has entered the grills near the
motor and around the on/off switch. Use a soft brush to remove any accumulated
dust.
• Wear safety glasses to protect your eyes whilst cleaning.
• If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild
detergent can be used but nothing like alcohol, petrol or other such cleaning
agents.
• Never use caustic agents to clean plastic part.
• Lubricate all moving parts at regular intervals.
Maintenance
CAUTION : Water must never come into contact with the tool.
If the supply cord of this power tool is damaged, it must be replaced by a
specially prepared cord available through the service organisation.
Customer Helpline 0345 640 0800
To Next Page
Loading...
Need help?
General
