10. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before starting
any cleaning work.
10.1 Cleaning
• Keepallsafetydevices,airventsandthemotor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• Werecommendthatyoucleanthedevice
immediately each time you have finished using it.
• Cleantheequipmentregularlywithamoistcloth
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device.
10.2 Carbon brushes
• Incaseofexcessivesparking,havethecarbon
brushes checked only by a qualified electrician.
Important!Thecarbonbrushesshouldnotbe
replaced by anyone but a qualified electrician.
10.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
10.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
• Typeofmachine:CX-TS800
• Articlenumberofthemachine:43.407.65
• Identificationnumberofthemachine:11011
• Replacementpartnumberofthepartrequired
For our latest prices and information please go to
www.einhell.co.uk
11. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
12. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage temperature
is between 5 and 30 °C.
Helpline No 0844 801 8701 / IRE 189 094 6244
17