Challenger Lifts CL10 User Manual

Rev. 01/02/2020
Installation, Operation & Maintenance Manual
Versymmetric® Two Post
Surface Mounted Lift
MODELS: CL10V3
CL10V3-QC (QUICK CYCLE)
10,000 LBS. CAPACITY
2500 LBS. PER ARM
2311 South Park Rd Louisville, Kentucky 40219
Email:
sales@challengerlifts.com Web site:www.challengerlifts.com
Office 800-648-5438 / 502-625-0700 Fax 502-587-1933
IMPORTANT: READ THIS MANUAL COMPLETELY BEFORE
INSTALLING or OPERATING LIFT

Challenger Lifts CL10 Specifications

General

Brand	Challenger Lifts
Model	CL10
Category	Lifting Systems
Language	English

Summary

General Specifications

Electrical Requirements

Safety Notices and Decals

Installation

Safety Requirements for Installation and Service

Essential safety guidelines for performing installation and servicing tasks on the lift.

Anchoring

Detailed instructions and requirements for securely anchoring the lift to the floor.

Overhead

Synchronizer Cables

Power Unit & Hydraulic Hoses

Guidance on connecting the power unit and routing hydraulic hoses.

Lock Release

Arm Installation

Electrical

Steps for connecting the lift's electrical system and power unit.

Final Adjustments

Hydraulics

Procedures for bleeding air from the hydraulic system and checking for leaks.

Synchronizing Cables

Lock Release Cable

Wiring Diagram

Operation Procedure

Owner/Employer Responsibilities

Important Safety Instructions

Crucial safety precautions to be followed when operating the lift.

Maintenance

Parts Breakdown