Challenger Lifts CL12 Series User Manual

Rev. 10/23/19
Installation, Operation & Maintenance Manual
Two Post Surface Mounted Lift
MODEL CL12
12,000 LBS. CAPACITY
3000 LBS. PER ARM
2311 South Park Rd, Louisville, Kentucky 40219
Email:
sales@challengerlifts.com Web site:www.challengerlifts.com
Office 800-648-5438 / 502-625-0700 Fax 502-587-1933
IMPORTANT: READ THIS MANUAL COMPLETELY BEFORE
INSTALLING or OPERATING LIFT

Challenger Lifts CL12 Series Specifications

General

Brand	Challenger Lifts
Model	CL12 Series
Category	Lifting Systems
Language	English

Summary

Site Preparation for Installation

Vertical Clearance

Check lift height for installation area based on full raised height.

Flooring Requirements

Electrical Requirements

Safety Notices and Decals

Understand all safety notices and decals for safe operation and installation.

Installation Procedures

Receiving and Lift Preparation

Column Extension and Anchoring

Assemble columns, install pawls, and anchor securely.

Overhead Beam and Cables

Install overhead beam, limit switch, and route synchronizer cables.

Power Unit and Hydraulic Lines

Power Unit Mounting and Fluid Fill

Lock Release and Arm Installation

Install lock mechanism and arms, gears, and restraints.

Final Adjustments and Checkout

Hydraulics and Cable Adjustments

Arm Keeper and Checkout Procedure

Wiring Diagram

Operation Procedures

Owner/Employer Responsibilities

Important Safety Instructions

Follow basic safety precautions when operating garage equipment.

Vehicle Operation

Lifting and Lowering a Vehicle

Safely lift and lower vehicle using correct procedures and load limits.

Maintenance Schedule