EasyManua.ls Logo

Challenger MT745D - Page 27

Challenger MT745D
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
547095D1 C Rev A-23
SAFETY
FIG. 35: Category 1 according to EN 15695-1:2009 Cab
Filtration (5) - location of this sign is on the right rear post
inside cab.
Cab does not provide a specified level of protection
against hazardous substances.
FIG. 36: Warning - High Pressurized fluid (6) - Avoid
contact with high-pressure fluids. Oil leak may produce
high pressure fluid stream which can penetrate skin. Do
not touch stream or use hands to locate leak. Search for
leaks with a piece of wood or cardboard. Protect hands
and body from high pressure fluids. If spray penetrates
skin, seek immediate medical treatment.
Never heat by welding, soldering or using a torch near
pressurized fluid lines or other flammable materials.
Machine must be stopped and cooled before checking
fluids. Use caution when removing radiator caps, plugs,
grease fittings or pressure taps.
Never open pressure lines under pressure. Release all
pressure before doing maintenance or repairs on any
pressurized system.
FIG. 37: Tiedown, Lift, and Rollover safety sign
locations.
FIG. 38: Tiedown symbol decal (1) is located inside
drawbar support at rear of machine on both sides, and on
the frame towards the front of machine on both sides.
FIG. 35
278
FIG. 36
289
FIG. 37
S082411002
1
2
3
FIG. 38
516932D1 01
R101315005

Related product manuals