Chamberlain 041D8071-4 User Manual (English)

To Next Page

Remove the light lenses

and cover from the

garage door opener

to identify the travel

module. Follow the

directions according to

the travel module.

TOOLS NEEDED

• 1/4" nut driver or socket

• Phillips head screwdriver

• Flat head screwdriver

There are two travel modules included in this kit. Once you have identiﬁ ed the correct model,

follow the appropriate instructions to replace the travel module.

TRAVEL MODULE

Models 041D8071-4 and 041A7114-7

Introduction

Installation

To prevent possible SERIOUS INJURY or

DEATH:

• Disconnect ALL electric and battery

power BEFORE performing ANY service

or maintenance.

The garage door MUST be in the fully

closed position during installation.

ALWAYS wear protective gloves and eye

protection when changing the battery or

working around the battery compartment.

NOTE: Close the garage door BEFORE installing the travel module. The images throughout this manual are for reference and your product may look different.

1 Disconnect all power 2 Identify the travel module

Disconnect electrical and battery power

(if applicable) to the garage door opener.

Model 041A7114-7

• Travel Module

• Screws (2)

• E-clip

Model 041D8071-4

• Travel Module with plate

• Screws (4)

• E-clip

• Washer

CARTON INVENTORY

Model 041A7114-7

Model 041D8071-4

Cover

Light Lens

Need help?

Do you have a question about the Chamberlain 041D8071-4 and is the answer not in the manual?

Chamberlain 041D8071-4 Specifications

General

Model Number	041D8071-4
Brand	Chamberlain
Type	Control Unit
Color	Black
Compatibility	Compatible with Chamberlain garage door openers
Security	Security+ 2.0
Frequency	315 MHz