EasyManua.ls Logo

Chamberlain 1356M User Manual

Chamberlain 1356M
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.liftmaster.com
Owner’s Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System
®
is connected and properly aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the front panel of your opener.
GARAGE DOOR OPENER
Model Series 1300
For Residential Use Only
Model 1356M - 1/2HP
Model 1346M - 1/3HP
Model 1355M - 1/2HP
Model 1345M - 1/3HP
®
Question and Answer IconNeed help?

Do you have a question about the Chamberlain 1356M and is the answer not in the manual?

Chamberlain 1356M Specifications

General IconGeneral
Model Number1356M
Horsepower1/2 HP
Security+ 2.0Yes
Battery BackupNo
TypeChain Drive
Drive SystemChain Drive
Operating Voltage120V AC
Lighting100W
Safety FeaturesManual Release

Summary

Owner's Manual and Initial Safety

Initial Safety and Usage Warnings

Provides crucial initial safety warnings and usage instructions for the garage door opener.

Introduction to Garage Door Openers

Safety Symbol and Signal Word Guide

Explains safety symbols and signal words used throughout the manual to indicate potential hazards.

Preparing Your Garage Door

Essential Tools for Installation

Lists the necessary hand tools required for the installation of the garage door opener.

Installation Planning

Sectional and One-Piece Door Considerations

Details planning aspects specific to sectional and one-piece garage doors, including reinforcement needs.

Carton Contents and Hardware

Installation Hardware Identification

Lists and illustrates the hardware included in the installation package for the opener.

Assembly Procedures

Assembling Rail, Chain, and Sprocket Components

Guides for attaching the rail, chain, and sprocket components to the motor unit.

Critical Assembly Safety Instructions

General Installation Warnings

Presents critical safety precautions to be followed before and during opener installation.

Installation Steps: Header Bracket and Rail

Determining and Installing Header Bracket

Steps to determine the correct mounting location and physically install the header bracket.

Installation Steps: Opener Unit Mounting

Attaching Rail and Positioning the Opener

Procedures for attaching the rail and correctly positioning the opener unit relative to the door.

Hanging the Opener Unit

Instructions for securely hanging the opener unit from structural supports using brackets.

Installation Steps: Controls and Wiring

Installing Door Control and Electrical Requirements

Steps for installing the door control, wiring, and understanding electrical requirements.

Installing Light, Lens, and Release Rope

Guides for installing the opener light, lens, and the emergency release rope and handle.

Installation Steps: Safety Sensors

Installing Safety Reversing Sensors and Brackets

Instructions for installing and aligning the safety reversing sensors and their mounting brackets.

Installation Step: Door Bracket

Fastening the Door Bracket to the Door

Procedures for attaching the door bracket to various types of garage doors, including one-piece doors.

Installation Step: Door Arm Connection

Connecting Door Arm to Trolley

Steps to connect the garage door arm to the opener trolley, including alternatives for one-piece doors.

Adjustment and Testing Procedures

Adjusting Travel Limits and Door Force

How to set the opener's travel limits and adjust the force for proper door operation.

Testing Safety Reversal and Protector Systems

Procedures for testing the safety reversal system and the protector system beam.

Operating Your Garage Door Opener

Safe Operation Guidelines and Manual Control

Safe operation practices, remote control usage, and manual door control instructions.

Opener Care, Maintenance, and Battery

Routine Maintenance and Battery Replacement

Schedule for regular maintenance checks, lubrication, and remote battery replacement.

Troubleshooting Common Problems

Diagnosing and Resolving Opener Issues

Comprehensive guide to diagnosing and resolving common issues with opener operation and performance.

Programming Remotes and Keypads

Adding Remotes and Managing Keypad PINs

Instructions for programming additional remote controls and managing keyless entry PINs.

Repair Parts Identification

Rail, Installation, and Motor Unit Parts

Identification of common repair parts for rail assembly, installation, and the motor unit.

Available Accessories

Overview of Optional Accessories

Description of various optional accessories available to enhance opener functionality.

Service and Warranty Information

Ordering Parts, Service, and Warranty Details

Information on how to order repair parts, contact customer service, and understand the product warranty.

Related product manuals