Chamberlain 374UT User Guide

3. Press and release the Program/LEARN button on your product. A ladder may be necessary to reach the Program/ LEARN button.
NOTE: Visit LiftMaster.com/374ut to program the Mini Universal Remote Control to a commercial door operator.
4. On the remote control, press and release the button that you would like to program twice. The blue LED will blink and the remote control will begin sending the
pre-programmed codes to the garage door opener. Transmission can take up to 60 seconds.

Chamberlain 374UT Specifications

General

Brand	Chamberlain
Model	374UT
Category	Remote Control
Language	English