Chamberlain 374UT User Manual

To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• ALWAYSkeepremotecontrolsoutofreachofchildren.NEVERpermitchildrentooperate,orplaywithremotecontrol
transmitters.
• ActivategateordoorONLYwhenitcanbeseenclearly,isproperlyadjustedandtherearenoobstructionstodoortravel.
• ALWAYSkeepgateordoorinsightuntilcompletelyclosed.NEVERpermitanyonetocrosspathofmovinggateordoor.
Universal Mini Remote Control
Read instructions thoroughly BEFORE beginning.
If using the Universal Mini Remote Control with residential door openers, the remote control must be used only
with door openers manufactured after 1993 that utilize photoelectric sensors. The photoelectric sensors are
always located on or near the bottom of the door track.
STOP
MODEL 374UT
TABLE OF CONTENTS
GETTING STARTED .................................................... 2
LOCATE THE PROGRAM/LEARN BUTTON ........................ 3-7
Chamberlain
®
products ............................................. 3
Genie
®
products ..................................................... 4
Linear
®
products ..................................................... 5
Wayne Dalton
®
products ........................................... 5
LiftMaster
®
products ................................................ 6
Overhead Door
®
products .......................................... 6
Stanley
®
products ................................................... 7
GARAGE DOOR OPENERS .......................................... 8-9
Programming to a garage door opener with a
Program/LEARN button ............................................. 8
Programming to a Genie
®
Intellicode
®
2
garage door opener ................................................. 9
Programming to a LiftMaster garage door opener using
the LEARN button on the control panel ......................... 10
COMMERCIAL DOOR OPERATORS ................................. 11
Programming to a commercial door operator
with a RADIO button................................................ 11
GATE OPERATORS .................................................... 12
Program to a gate operator
with a Program/LEARN button .................................... 12
EXTERNAL RECEIVERS ............................................... 13
Programming to an external receiver
with a Program/LEARN button .................................... 13
MYQ
®
LIGHT CONTROLS ............................................ 14
Programming to a MyQ
®
Light Control .......................... 14
NEED HELP? ........................................................... 15
BATTERY ............................................................... 16

Chamberlain 374UT Specifications

General

Brand	Chamberlain
Model	374UT
Category	Remote Control
Language	English

Summary

Getting Started

Locate the Program/Learn Button

Chamberlain Products

Locating the Program/LEARN button on Chamberlain garage door openers.

Genie Products

Locating the Program/LEARN button on Genie garage door openers.

Linear Products

Locating the Program/LEARN button on Linear garage door openers.

Wayne-Dalton Products

Locating the Program/LEARN button on Wayne-Dalton garage door openers.

LiftMaster Products

Locating the Program/LEARN button on LiftMaster garage door openers.

Overhead Door Products

Locating the Program/LEARN button on Overhead Door openers.

Stanley Products

Locating the Program/LEARN button on Stanley garage door openers.

Garage Door Openers

Programming to a Garage Door Opener with a Program/LEARN Button

Step-by-step guide to programming the remote to a garage door opener with a Program/LEARN button.

Programming to a Genie Intellicode 2 Garage Door Opener

Instructions for programming the remote to a Genie Intellicode 2 garage door opener.

Programming to a LiftMaster Garage Door Opener Using the LEARN Button on the Control Panel

Guide to programming the remote to a LiftMaster opener via its control panel LEARN button.

Commercial Door Operators

Programming to a Commercial Door Operator with a RADIO Button

Procedure for programming the remote to a commercial door operator using its RADIO button.

Gate Operators

Programming to a Gate Operator with a Program/LEARN Button

Steps to program the remote to a gate operator with a Program/LEARN button.

External Receivers

Programming to an External Receiver with a Program/LEARN Button

Instructions for programming the remote to an external receiver via its Program/LEARN button.

MyQ Light Controls

Programming to a MyQ Light Control

Guide for programming the remote to a MyQ Light Control module.

Need Help?

Battery