Do you have a question about the Chamberlain 710 WHC and is the answer not in the manual?
Connects rail sections, pulley bracket, and trolley.
Threads chain/cable and secures the sprocket cover.
Adjusts chain tension for proper operation.
Mounts and aligns the safety sensors.
Sets the door's travel endpoints.
Sets the opener's force sensitivity for open/close.
Verifies the safety reversing sensor functionality.
Verifies the safety reverse system response.
Connects rail sections, pulley bracket, and trolley.
Threads chain/cable and secures the sprocket cover.
Adjusts chain tension for proper operation.
Mounts and aligns the safety sensors.
Sets the door's travel endpoints.
Sets the opener's force sensitivity for open/close.
Verifies the safety reversing sensor functionality.
Verifies the safety reverse system response.
| Drive System | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Voltage | 120V |
| Frequency | 60 Hz |
| Security+ 2.0 Rolling Code Technology | Yes |
| Battery Backup | No |
| Max Lift Height | 7 feet |
| Lighting | Yes |
| Security | Yes |












Loading...