Chamberlain 953EV-P2 - User Manual

3-BUTTON REMOTE CONTROLS
MODELS 953EV, 953EV-P2, 953EVC, 953EVC-P2,
956EV, 956EV-P2, 956EVC, AND 956EVC-P2
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of
reach of children. NEVER permit children
to operate or play with remote controls.
• Activate gate or door ONLY when it can be
seen clearly, is properly adjusted and
there are no obstructions to door travel.
• ALWAYS keep gate or garage door in
sight until completely closed. NEVER
permit anyone to cross path of moving
gate or door.
For use with Chamberlain 315 MHz or 390 MHz garage door openers manufactured after
January 1, 1993. The garage door opener activates when the programmed button on the remote
control is pressed. The remote control can activate up to three garage door openers.
Make sure the garage door opener has a working light bulb because it is a programming indicator.
LED
LED
Locate the Program button on the
remote control.
Locate the Learn
button on the garage
door opener.
NOTE: Your garage door
opener may look different.
OR OR
Learn
LED
Learn
LED
Learn
LED
Green
or
Red/Orange
Purple
Yellow
Program Button
Program Button
4
Press and release the Learn
button on the garage door
opener.
3
To exit programming mode,
press any remote control
button except the button
that was just programmed.
Install the visor clip.
7
Press the remote control button
programmed in step 2 until the
garage door opener lights flash
or two clicks are heard.
To test, press the programmed
button on the remote control...
1
Within 30 seconds...
The Learn LED will light.
56
Press and hold the program button
the remote control until the LED on
the front of the remote control
turns on.
Learn
Button
Click
Click
The garage door
opener will activate.
2
Press and release the remote control button you wish to use the
number of times that corresponds with the garage door opener type:
# of Presses Garage Door Opener Type
1
2
3
4
Yellow Learn Button (Security+ 2.0
®
)
Purple Learn Button (315 MHz Security+
®
)
Red/Orange Learn Button (390 MHz Security+
®
)
Green Learn Button (390 MHz Billion Code)
MODELS 953EV, 953EV-P2,
953EVC AND 953EVC-P2
MODELS 956EV, 956EV-P2,
956EVC AND 956EVC-P2
GARAGE ACCESS SYSTEM
REMOTE
GARAGE ACCESS SYSTEM
KEYCHAIN REMOTE
PREPARE
PROGRAM THE REMOTE CONTROL (953EV, 953EV-P2, 953EVC AND 953EVC-P2)
953EV, 953EV-P2,
953EVC AND
953EVC-P2
956EV,
956EV-P2,
956EVC AND
956EVC-P2
Para Manual en Español ir a:
http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A5043SP.pdf
WARNING: This product can expose you to chemicals including lead, which are known to
the State of California to cause cancer or birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov

Summary

Product Overview and Safety Precautions

Chamberlain Remote Control Models

Introduces Chamberlain 3-button remote controls for garage door openers manufactured after 1993.

Critical Safety Warnings

Provides warnings about serious injury or death from moving gates or garage doors and child safety.

Remote Control Programming

Prepare for Programming

Locate the Learn button on the garage door opener and the Program button on the remote.

Programming Procedure for 953 EV Series

Steps to program 953EV, 953EV-P2, 953EVC, 953EVC-P2 remotes based on opener type.

Programming Procedure for 956 EV Series

Steps to program 956EV, 956EV-P2, 956EVC, 956EVC-P2 remotes based on opener type.

Maintenance and Support

Battery Replacement

Instructions and warnings for replacing the remote control battery with CR2032 coin cells.

Warranty and Replacement Parts

Details the one-year limited warranty and lists available replacement parts like battery and visor clip.

Chamberlain 953EV-P2 Specifications

General

Model	953EV-P2
Type	Remote Control
Frequency	315 MHz
Remote Control	Yes
Security+ 2.0	Yes
Battery	CR2032
Buttons	3-button remote