Chamberlain PD222 User Manual

The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.chamberlain.com
CONTENTS
Preparation .............................. 1-4
Assembly ................................. 5-9
Installation ............................ 10-17
Install the Door Control ............. 18-19
Install the Protector System
®
...... 20-23
Power .................................. 24-25
Adjustments .......................... 26-28
Operation.................................. 29
Features ................................... 30
Remote Control .......................... 31
To Erase the Memory .................... 32
To Open the Door Manually ............ 32
Maintenance .............................. 33
Diagnostic Chart ......................... 34
Warranty .................................. 35
Chain Drive
Garage Door Opener
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
■ Periodic checks of the garage door opener are required to ensure safe operation.
■ The model number label is located on the back panel of your garage door opener.
■ This garage door opener is compatible with Security✚ 2.0™ accessories.
Serial Number:
Date of Purchase:
Model Number:
Models HD220, HD220C,
PD220, PD222, LW260C,
and LW2200
FOR RESIDENTIAL USE ONLY
INSTALL ON 7 FOOT
SECTIONAL DOORS ONLY
Register your new garage door opener at
www.prodregister.com/chamberlain or
scan the QR code with your smartphone
Write down the following information
for future reference:

Chamberlain PD222 Specifications

General

Brand	Chamberlain
Model	PD222
Category	Garage Door Opener
Language	English

Summary

Preparation

Safety and Door Preparation

Explains safety symbols, signal words, and door balance checks before installation.

Required Items and Parts Inventory

Lists tools, additional items, carton contents, and hardware for assembly.

Assembly

Rail, Trolley, Pulley, and Chain Assembly

Steps for assembling the rail, trolley, pulley, and installing/tensioning the chain.

Installation

Installation Overview and Header Bracket

Crucial safety instructions and steps for locating and mounting the header bracket.

Mounting Opener and Door Components

Attaching rail, hanging opener, connecting door arm, and installing door bracket.

Wiring, Sensors, Power, and Labels

Wiring door controls, installing safety sensors, connecting power, and placing warning labels.

Final Checks and Warning Labels

Attaching warning labels and performing final safety sensor alignment.

Adjustments and Testing

Programming Travel Limits

Procedures for setting the open and close travel limits for the garage door.

Safety Reversal System Testing

Tests to verify the functionality of the safety reversal system and protector sensors.

Operation

Safety, Features, and Controls

Safety rules, features like lights and energy conservation, and control operation.

Manual Operation and Memory Management

Procedures for manual door opening and erasing stored remote control codes.

Maintenance

Scheduled Maintenance and Battery Replacement

Monthly and yearly maintenance recommendations and remote battery replacement guide.

Troubleshooting

Diagnostic Chart for Issue Resolution

A guide to diagnosing problems using flashing codes and their solutions.

Warranty and Support

Contact Information and Warranty Details

Details for service calls, repair parts ordering, and warranty coverage.