Chamberlain SENTEX Infinity Series User Manual

Doc. 6001565
Doc. 6001565Doc. 6001565
Doc. 6001565
Rev C
Rev CRev C
Rev C
INFINITY
INFINITYINFINITY
INFINITY
INSTALLATION INSTRUCTIONS
WITH MULTI-LINK FIRMWARE
Software Rev. 2.0 and up
]

Chamberlain SENTEX Infinity Series Specifications

General

Brand	Chamberlain
Model	SENTEX Infinity Series
Category	Control Systems
Language	English

Summary

IMPORTANT NOTICES

Grounding and Power Supply Best Practices

Proper grounding prevents static damage. Use dedicated power sources for stability and noise reduction.

INSTALLATION TIPS

Unit Grounding and Power Configuration

Ensure proper earth ground connection and use dedicated power sources for reliable operation.

WIRING BETWEEN UNITS

Short Distance Unit Wiring (< 30 Feet)

Long Distance Unit Wiring (> 30 Feet)

CABINET MOUNTING PROCEDURES

Cabinet Preparation and Handling

Mounting and Grounding Process

Secure cabinet with screws. Ground cabinet and circuit board thoroughly to earth ground.

SYSTEM WIRING AND POWER

Telephone and Processor Board Wiring

Connect telephone lines to daughter board and processor board signals using terminal blocks.

Door Control, Locks, and CCTV Wiring

Wire relays for door locks, magnetic locks, and optional CCTV units to specific terminals.

Multi-Link Unit Connectivity

Connect units via RS-232 (under 30ft) or short-haul modems (over 30ft).

Power Connections and Status Indicators

AUXILIARY RELAY MODULE INSTALLATION

ARM Unit Installation and Relay Control

TESTING AND ADJUSTING THE SYSTEM

Unit Sequencing and LCD Display Adjustment

Sequence units in chain, adjust LCD contrast and viewing angle.

Telephone Entry and Interface Board Tests

Functional Testing of Features

FCC REQUIREMENTS

Installation Information and Compliance