Chamberlain Series 1100 User Manual

Garage Door Opener
OWNER’S MANUAL
For Residential Use Only
The Chamberlain Group, Inc.
A DUCHOSSOIS ENTERPRISE
845 Larch Avenue
Elmhurst, Illlinois 60126-1196
Series 5100 – 1/2HP
(Includes Model 7200)
Series 4100 – 1/2HP
(Includes Model 710WHC)
Series 2100 – 1/3HP
Series 3000 – 1/2HP
Series 1100 – 1/4HP
Complies with UL 325
Regulations effective
January 1, 1993.
®
®
®
®
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned
■ Periodic checks of the opener are required to ensure safe operation.
■ The model number label is located on the front end panel of your opener as
shown.

Chamberlain Series 1100 Specifications

General

Brand	Chamberlain
Model	Series 1100
Category	Garage Door Opener
Language	English

Summary

Assembly Procedures

Assemble T-rail and Attach Pulley Bracket

Install Trolley on T-rail

Fasten T-rail to Opener

Install Chain/Cable and Sprocket Cover

Tighten Chain and Cable

Installation Guide

Determine Header Bracket Location

Identify the correct mounting position above the garage door.

Install the Header Bracket

Securely mount the header bracket to the wall or ceiling.

Attach T-rail to Header Bracket

Position the Opener

Hang the Opener

Electrical Requirements

Fasten Door Bracket

Connect Door Arm to Trolley

Safety Systems and Adjustments

The Protector System®

Overview of the safety reversing sensor system.

Install Safety Reversing Sensor

Mount and align the safety reversing sensor units.

Adjust UP and DOWN Limits

Set the opener's travel endpoints for open/close.

Adjust the Force

Set the opener's force sensitivity for safe operation.

Test the Protector System®

Verify the sensor's beam is functioning correctly.

Test the Safety Reverse System

Ensure the door reverses upon obstruction.

Operation, Maintenance & Programming

Important Safety Instructions

Critical safety guidelines for operation and maintenance.

Operation of Your Opener

Receiver and Remote Control Programming

Troubleshooting and Support

Having a Problem?

Solutions for common operational issues.