Champion aXis CONTROLLER - Specifications; 14 Kw HSB Specifications

aXis CONTROLLER HOME STANDBY GENERATOR
SPECIFICATIONS
14
SPECIFICATIONS
14kW HSB Specifications
Home Standby Generator
Maximum continuous power, LPG 14 kW
Maximum continuous power, NG 12.5 kW
Rated voltage 120/240
Amps 116.6/58.3 LPG (propane), 104/52 NG (natural gas)
Harmonic distortion Less than 5%
Main line circuit breaker 65 amp
Phase Single
Frequency 60 Hz
Unit weight 438.7 lb. (199 kg)
Size (L x W x H) 49 x 28 x 28 in. (124.5 x 71 x 71 cm)
Engine
Type Milwaukee Series OHV Commercial V-Twin
No. of cylinders 2
Displacement 754 cc
Cylinder block Aluminum with cast iron sleeves
Ignition system Solid state – magneto
Spark plug F7RTC (NGK BPR7ES)
Governor Mechanical
Starter Electric 24V DC
Oil capacity 1.6 qt (1.5 L)
Oil Type 5W-30 Full Synthetic*
RPM 3600
Controls
Mode switch auto Auto start on utility failure
Mode switch manual Starts on demand
Mode switch off Stops unit/control and charger active
Ready to run/maintenance messages Standard
Programmable start delay Standard
Engine start sequence Standard
Starter lockout Standard
Battery charger/low battery indicator Standard
Charger fault Standard
AVR over voltage protection Standard
Low oil protection Standard
Safety fused Standard
Overcrank/overspeed/underspeed protection Standard
* Unit ships without oil. Add oil before starting the HSB.