GENERAL
Model Numbers
D-HBT, D-HBTC, D-H1T, D-H1TC
The D-HBT model is a high temperature
(180°F/82°C rinse) sanitizing model with
booster.
The D-H1T, D-H1TC models are high tem-
perature (180°F/82°C rinse) sanitizing models.
Standard Equipment includes:
D-HBT, D-HBTC, D-H1T, DH1TC
• Automatic tank fill and start
• Adjustable cycle selector
• Built-in electric booster heater (D-HBT only)
• Field convertible to corner model
• Electric tank heat
• Low-water tank heat protection
• 2-hp drip-proof pump motor
• Door safety switch
• Door activated drain
Options
• Electric booster (70°F/39°C temperature
rise) heater for 110°F/43°C supply water
• Steam injector or steam coil tank heat
(steam booster 40°F/23°C-70°F/39°C rise)
Accessories
6
• Common utility connections
• Two dish racks (peg and flat bottom)
• Detergent/chemical connection provisions
• Stainless steel front and side panels
• 1-1/2" O.D. gravity drain connection
• Water pressure reducing valve (mounted)
• Interchangeable upper and lower spray arms
Additional dishracks:
Dish rack (peg) P/N 101285
Silverware rack (flat bottom) P/N 101273
3/4" Pressure reducing valve (PRV) P/N 112387
To Next Page
Loading...
Need help?
General
