To Next PageTo Next PageWhat to do if my Champion DH5000T will not drain?
If your Champion Dishwasher isn't draining, start by cleaning the drain screen. If the problem persists, the drain valve may be defective (contact a Service Agent) or the building drain may be clogged (contact Building Maintenance).
What to do if my Champion Dishwasher has low or no water?
If your Champion Dishwasher has low or no water, start by checking if the main water supply is off and open the supply valve. Also, ensure the PRV is set to 20-22 PSI flowing. If these steps don't resolve the issue, the line strainer may be clogged or the solenoid valve may be defective, in which case you should contact a Service Agent.
Why does my Champion Dishwasher have poor wash results?
Poor wash results from your Champion Dishwasher can occur due to several reasons. Check if wares are incorrectly loaded in the dishrack, and reposition them or reduce the amount of wares. Clogged screens or spray arms can also cause this issue, so clean them thoroughly. Other potential causes include chemical injectors not feeding properly (contact your Chemical Supplier), a defective thermostat (contact a Service Agent), a defective detergent dispenser (contact your Chemical Supplier), or low water temperature (contact a Service Agent).
How to fix a Champion DH5000T that will not run?
If your Champion Dishwasher will not run, make sure the hood is completely closed. Check the breaker on the panel to ensure the main power is on. Also, verify that the dishwasher is turned ON.
Why aren't chemicals feeding into my Champion DH5000T Dishwasher?
If chemicals aren’t feeding into your Champion Dishwasher, first check if the chemical supply is low and refill the chemical container. A clogged pick-up tube might also be the problem (contact your Chemical Supplier). Additionally, inspect the supply tubing for damage or kinks, and straighten the tubing if necessary. If the supply tubing is damaged, contact your Chemical Supplier.
What to do if my Champion Dishwasher stays in wash cycle too long?
The Champion Dishwasher might stay in the wash cycle longer than expected because the Rinse Sentry extends the wash mode to allow the final rinse water booster temperature to reach 180°F/82°C. If the wash cycle runs for longer than 6 minutes, contact a Service Agent.
Why is steam not being vented in my Champion DH5000T Condensate Removal Option Model?
Steam may not be venting in your Champion Dishwasher Condensate Removal Option Model if the incoming cold water temperature is above 75°F/24°C or if the incoming water pressure is below 45 PSI flowing pressure at the dishwasher. Check both the incoming water temperature and pressure. If these are within the correct range, the condensate coil or fan may be defective, and you should contact a Service Agent.
Why is steam not being vented from my Champion DH5000T Dishwasher Direct Vent Option Model?
Steam not being vented from your Champion Dishwasher Direct Vent Option Model may be due to a blocked or defective direct vent fan. Contact a Service Agent or Building Maintenance for assistance.
Instructions for registering your Champion dishwasher product online in the USA and Canada.
Information and form for product registration via fax, including contact numbers for USA and Canada.
Details of revisions made to the manual, including date, pages affected, and description of changes.
Details Champion's limited warranty for machines and parts, including coverage and exclusions.
Provides a description of the DH5000T Series dishwasher, including features and optional equipment.
Instructions for inspecting the dishwasher upon delivery and checking for damage or missing parts.
Guidelines for positioning the dishwasher, including necessary clearances for operation and servicing.
Information on installing Condensate Removal or Direct Vent options for the dishwasher.
Steps for converting a straight-through operation dishwasher to a corner configuration.
Detailed instructions for safely connecting the incoming power supply to the dishwasher.
Requirements for connecting hot and cold water supplies for different dishwasher models.
Instructions for drain connection for all models and vent fan control for standard models.
Details on provisions for connecting chemical dispensing systems for various dishwasher models.
Explanation of the controls and indicators on the dishwasher's control panel.
Description of the digital displays indicating wash and rinse temperatures.
Information on error codes displayed by the temperature displays and their meanings.
Step-by-step guide for operating the dishwasher using the standard wash cycle.
Procedure for initiating the automatic drain cycle for the dishwasher.
Instructions for operating the dishwasher using the heavy duty wash cycle.
Explanation of the Rinse Sentry mode and its effect on cycle times.
Daily cleaning procedures for the dishwasher after each meal period or 8 hours of operation.
Information on mineral deposit removal (de-liming) and safety precautions.
Guidelines for daily, weekly, and yearly maintenance tasks for the dishwasher.
Illustration and parts list for the wash pump and motor assembly.
Parts breakdown for fill piping assemblies for various models and options.
Illustration and parts list for the booster assembly for all models.
Parts breakdown for the control panel, cabinet, and input terminal block assemblies.
Parts breakdown for track, panel, hood, and hood handle assemblies.
Parts breakdown for electrical control boxes and shrouds for vent options.
Parts breakdown for drain water tempering assembly and racks, strainers, PRV.
Overview of the dishwasher's control panel temperature displays.
Procedures for checking the operation and display segments of the temperature displays.
Instructions for adjusting the wash and rinse temperature set-points on the display.
Illustrations and definitions of codes that may appear on the temperature displays.
Description of the Direct Vent Option for the DH5000T dishwasher.
Step-by-step instructions for installing the direct vent shroud onto the dishwasher.
Instructions for installing the optional Champion supplied vent fan.
Instructions for mounting the direct vent fan electrical control box on the dishwasher.
Details on connecting the optional Champion supplied direct vent fan.
Instructions for installing a direct vent fan not supplied by Champion.
Instructions for connecting a direct vent fan supplied by others to the control box.
Description of the Condensate Removal Option for the DH5000T dishwasher.
Step-by-step instructions for installing the condensate removal shroud.
Instructions for mounting the condensate removal electrical control box on the dishwasher.
Details on electrical and plumbing connections for the condensate removal shroud.
Information on cold water supply and electrical connections for the condensate removal option.
Wiring diagram for the condensate removal control box.
Visual representation of the different time cycles for the DH5000 dishwasher.
Electrical schematics for the standard model and optional DH5000T dishwashers.
Instructions for installing the control box wall mount kit for the DH5000.
Template for locating and drilling holes for mounting the control box bracket.
General| Brand | Champion |
|---|---|
| Model | DH5000T Series |
| Category | Dishwasher |
| Language | English |
