10
SmartChef Controls
SmartChef Control Panel
Main Burner Control Knobs
Side Burner Control Knob
Electronic Ignitor
Light Ring Tank Level Indicator
Control Start/Stop button ON/OFF button DADO button
Meat Probe Ports
● Control Start/Stop Button - Initiates or stops control mode.
● Light Ring - Provides general grill info at a glance. Generally,
Green = Ready, Orange = Lit, Red = Error
● Meat Probe Ports - Plug integrated probes into these ports.
● On/Off Button – Turn Power to the unit ON/OFF. Must be
ON to use main burners of grill. Side burner can be operated
independently.
● Tank Indicator – Tank image flashes when you are running
low on gas. Tank image is solid when the tank is expected to
be empty.
● DADO Button – WiFi/DADO functions. ON = WiFi
Connected. OFF =Attempting to Connect. Flashing = Not
Connected or has Firmware update available.
When not connected, pressing DADO button will attempt to
rejoin the WiFi settings programmed. If a Firmware update is
available, pressing the DADO button will begin the download.
Press and hold to reset WiFi settings to default. Open app or
visit charbroil.com/smartchefgrill for more detail information.
To Next Page
Loading...
Need help?
General
