Charmglow 720 - Propane Tank Assembly

12
1. Attach regulator to the propane tank by turning the regulator handle clockwise (FIGURE A).
2. Turn off LP supply at cylinder when appliance is not in use.
(FIGURE A)
1. Put the gas tank into the gas tank tray. Then tighten up the gas tank retention kit for
fixing the gas tank as shown in the figure 1 below.
2. Here are two buttons “A” and “B” on gas tank tray, the “B” button is fix the gas tank
tray, if you want to pull the gas tank try, please press ”A” button.
Fi
g
ure 1
PROPANE TANK ASSEMBLY
C
L
O
S
E
O
P
E
N
800
700
600
500
400
300
200
100
A
A
800
700
600
500
400
300
200
100