CHART Carbo-MAX 450 - Preface; General; Product Advantages; Product Manual

1
Product Manual - Carbo-Max
®
Bulk CO
2
Systems
General
The Carbo-Max 600 High Flow, 750 High Flow and
Carbo-Max 1000 systems are innovative bulk CO
2
systems
that meet the demands of high volume customers. These
systems oer the capacity and ow rates necessary for high
volume users such as stadiums, brew pubs, cineplexs and
microbreweries.
Each Chart Carbo-Series tank is equipped with a proprietary
vacuum maintenance system to ensure optimized long-term
performance. Unique to the market, this feature oers greater
eciency over longer periods of time.
Product Advantages
• Stainless steel, double-walled, vacuum-insulated
container
• Proprietary vacuum regeneration system for on-site
maintenance
• Optional patented Sure-Fill
™
System enables tank lling
with no manual venting
• Stable 6” unibody legs meet health department sanitation
requirements standard on Carbo-Max 600 & 750
• Lab Base available with the Carbo-Max 1000 model so it
can be moved with a pallet jack
• Safe, low operating pressure
• Easy-to-read gauges for CO
2
contents and tank pressure
• Ecient CO
2
liquid withdrawal system
• Fully automated system requiring no electricity
• Maximizes limited space with one system replacing all of
your high-pressure cylinders, using less than 3’ of oor
space
• Sized to match usage needs - available in a variety of
sizes to meet the unique demands of your business
Product Manual
The Carbo-Max Series Product Manual is designed to be
used in conjunction with Carbo Max 450, 600, 750 and 1000.
If there are any questions regarding the operation of the tank,
contact Chart’s Technical Service division at 1-800-247-
4446.
This manual contains information regarding the safe
operation and handling of CO
2
. It should be thoroughly read
and understood by anyone that operates the equipment.
The schematics, piping illustrations, and parts lists located in
the Specications section show a reference number for each
component used on the tank. The reference numbers may
refer to the same functional component between the various
models. The reference numbers will be used throughout
this manual to draw specic attention to a component while
describing its function, operation, or repair.
The safety requirements for operating the tank and handling
or transporting extremely cold liquid products are shown
in the Safety section. Use this safety section as a “Safety
Checklist” each time the equipment is being used.
The Introduction section discusses the general features of the
tank and the theory of operation.
Determining locations of the storage tank and the ll box
are included in the Installation section. Part numbers are
provided for easy identication of ush-mount and surface-
mount ll boxes. This Installation section details the various
connections required for the system and concludes with
information on connecting to the beverage system.
The Operation and Troubleshooting section will help with
instructions on lling the storage tank, operating the system,
and general troubleshooting questions that may arise.
Preface