Chattanooga Intelect Mobile 2 - Power; System Specifications and Dimensions; Electro Stimulation; Specifications


EN
POWER
Input  -  V AC, . to . A, / Hz
Electrical Class CLASS II
Mode of Operation Continuous
Note: Mains isolation is achieved by use of the double
pole switch located on the rear panel.
Electrical Type (Degree of Protection)
Ultrasound .TYPE BF
Electrotherapy .TYPE BF
Electrotherapy Vacuum .TYPE BF
Ultrasound & Electrotherapy .TYPE BF
SYSTEM SPECIFICATIONS AND DIMENSIONS
Width Depth Height Weight (no battery)
Intelect Mobile  Head Unit
COMBO cm .cm cm .kg
UltraSound cm .cm cm .kg
STIM .cm .cm cm .kg
Cart configurations
Cart (Safe working load .kg) cm MAX cm MAX cm .kg
Cart with vacuum cm MAX cm MAX cm
.kg
Device on cart - -  cm -
ELECTRO STIMULATION
SPECIFICATIONS
Output specifications are described for each
waveform from pages -.
Unless otherwise specified, electrotherapy controls
accuracy is: ±  %.
Load impedance: - Ohm
CC = constant current, eect of load impedance on
voltage
CV = constant voltage, eect of load impedance on
current
VACUUM SPECIFICATIONS
Power
Input - Vdc, maximum peak current A
Electrical Type TYPE BF