INTELECT® MOBILE 2 QUICK START GUIDE
OUTPUT POWER
US applicator
Frequency
cm
cm
cm
cm
MHz MHz MHz MHz MHz MHz MHz MHz
Eective
Radiating Area
ERA INTL (cm2)
. . . . .
Max Output
power in
Continuous mode
W .W W W W .W W .W
Max Output
power in Pulsed
mode
W
.W
(*)
.W W .W .W W .W
Max Amplitude
in Continuous
mode
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
Max Amplitude in
Pulsed mode
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
W/
cm
(*) An error of + 0.25 W can be measured with 1cm2
US applicator, pulse mode 100Hz at 10% or 20% Duty
Cycle.
General characteristics
Vacuum Range . to mbar maximum +/-
%
Vacuum Modes Continuous or Pulsed
Continuous.
setting over vacuum range,
mbar per setting,
+ mbar to mbar per setting
Pulsed Mode
Maximum Vacuum settings to , +mbar to
-mbar per setting
Minimum Vacuum settings in to , +mbar to
-mbar per setting
Hold Time in minimum & maximum vacuum settings,
- seconds, in second steps, +/-. seconds
ULTRASOUND SPECIFICATIONS
Frequency MHz; MHz
Duty Cycles %, %, %, Continuous
Pulse Repetition Rate , , or Hz
Pulse duration: -. ms
Max (ON): . ms
Min (OFF): ms
To Next Page
Loading...
