Chattanooga Primera - Quick Start Instructions

Chattanooga
™
Primera Operation Manual
9
1. Insert a 9 volt PP3 Alkaline battery. Alternatively insert a rechargeable
Nickel Hydride battery. Do not use Ni-Cad rechargeable batteries
2. Insert lead wire/s to channel A and B if both channels are to be used.
3. Switch on the unit by pressing the ON/OFF button.
4. Press the PRG [Programme] button to select:
P01 - P07 or HAN for preset TENS programmes.
P08 - P13 for preset STIM programmes.
The summary of all programmes is on page 10.
5. To start press channel A + and B + button if you are using both
channels, increase the stimulation to the desired level.
6. To stop the programme, press the ON/OFF button which will turn the
unit off.
Quick Start Instructions