Page 8 of 11 Bubble Machine User Manual (Rev. 04)
4.
O
PERATION
Operation
1. Place the Bubble Machine on a level surface and loosen the thumbscrews on the
front of the unit for fluid tank access. Lift the cover.
2. Fill the tank with bubble fluid.
Note: We recommend using CHAUVET® bubble fluid (BJU) which has been
specially formulated for use with CHAUVET® bubble machines.
3. Lower the cover and tighten screws.
4. Plug into a suitable wall outlet.
5. Turn on the unit. For remote use, move the switch to Remote and use the optional
remote controller to operate the bubble machine.
Note: Do not leave unused fluid in the reservoir for an extended period. The
fluid may thicken in the reservoir.
AC-W wireless controlle
is now available for use with the
Bubble Machine. The AC-W is a wireless trigger that does not
need an external power supply — easy setup and easy teardown.
In addition, the AC-W has an operation range of 100 ft.
(unobstructed) for increased flexibility enabling the attached
machines to be triggered from almost anywhere.
To Next Page
Loading...
