What to do if my Chauvet LEDrain 38C does not power up?
If your Chauvet Lighting Equipment isn't powering on, first ensure the power outlet is working. Also, check the power cord to make sure it's securely connected.
Why does the breaker/fuse keep blowing on my Chauvet Lighting Equipment?
If the breaker or fuse keeps blowing in your Chauvet Lighting Equipment setup, it could be due to an excessive circuit load. Check the total load on the electrical circuit. Alternatively, there might be a short circuit in the power wires, so inspect the electrical wiring, both internal and external, for any shorts.
How to fix Chauvet Lighting Equipment not responding to DMX?
If your Chauvet Lighting Equipment fixture isn't responding to DMX, there are several potential causes. First, check the control panel and unit addressing to ensure the DMX addressing is correct. Also, inspect the DMX cables for damage and ensure they are properly connected. Verify the polarity switch settings on the controller. If the issue persists, the DMX input or the Main PCB might be faulty and need replacement.
What to do if I have a loss of signal in my Chauvet Lighting Equipment?
If you're experiencing signal loss with your Chauvet Lighting Equipment, make sure you are using only DMX compatible cables. If bouncing signals are the issue, install a terminator. For long cable runs or low signal levels, install an amplifier after a fixture with a strong signal. If you have too many fixtures, install an optically coupled DMX splitter after unit #32. Also, keep DMX cables separated from power cables or black lights to avoid interference from AC wires.
Lists all items provided with the LEDrain 38C fixture upon purchase.
Guidance on carefully unpacking the fixture and checking for damage.
Explains conventions used in the manual for clarity and understanding.
Details the meaning of warning icons used throughout the manual for user safety.
Critical information for safe installation, usage, and maintenance of the fixture.
Outlines the key capabilities and functionalities of the LEDrain 38C.
Visual representation of the fixture's main components and connection points.
Instructions for connecting the fixture to a power source safely and correctly.
Guidelines for connecting multiple fixtures together for power distribution.
Information on how to mount the fixture and orient it for optimal use.
Procedures and safety considerations for rigging the LEDrain 38C fixture.
Steps to set the initial DMX channel for controlling the fixture.
How to operate the fixture using an external DMX controller.
Choosing between 3-channel and 7-channel DMX modes for control.
Setting up fixtures to follow a master unit for synchronized operation.
How to control the strobe effect speed and its variations.
Using preprogrammed color fade and effect programs without a DMX controller.
Operating the fixture using built-in sound-activated programs.
Selecting and mixing static colors directly from the fixture's controls.
Connecting multiple fixtures for synchronized DMX or master/slave shows.
Detailed breakdown of DMX channel assignments and their functions in 7-CH and 3-CH modes.
Fundamental explanation of DMX control protocol for lighting systems.
Recommended procedures for cleaning and maintaining the fixture for optimal performance.
Information on DMX data cable specifications, connectors, and proper wiring.
Instructions for creating serial data links for DMX control and master/slave operation.
Chart detailing the pinout for converting between 3-pin and 5-pin DMX connectors.
Step-by-step guide for connecting fixtures in a DMX serial data chain.
Procedure for assigning the correct starting DMX address to each fixture.
Common issues, their causes, and recommended solutions for the fixture.
Details for reaching CHAUVET technical support and general information.
Instructions for returning merchandise, including RMA number requirements.
Information on how to file claims for shipping damage or other issues.
Detailed specifications including dimensions, power, light source, and thermal limits.
Power| auto-ranging power supply | 100~240 VAC, 50/60 Hz |
|---|---|
| power consumption at 120 VAC, 60 Hz | 10 W (0.2 A) max, 0.2 A inrush |
| power consumption at 230 VAC, 50 Hz | 9 W (0.1 A) max, 0.2 A inrush |
| fuse | F 2 A, 250 V |
Photo Optic| luminance at 1 m | 1, 033 lux |
|---|---|
| beam angle | 15° |
| field angle | 23° |
Weight and Dimensions| length | 6.2 in (157 mm) |
|---|---|
| width | 7.4 in (188 mm) |
| height | 11.2 in (284 mm) |
| weight | 2.8 lbs (1.2 kg) |
To Next Page