To Next PageTo Next Page
Need help?Do you have a question about the Chauvet Obey 10 and is the answer not in the manual?
Important information regarding installation, usage, and maintenance of the controller.
Details the buttons, faders, and LED indicators located on the front panel of the controller.
Details the ports and switches located on the rear panel of the controller, including power and DMX connections.
Step-by-step guide for physically installing and connecting the Obey™ 10 controller.
Explains how to set DMX starting addresses for fixtures connected to the controller.
Instructions on how to re-assign physical faders to control different DMX channels for custom setups.
Procedure to reverse the output of any given channel on the controller for specific effects.
Steps to enter the programming mode to create and store scenes and chases.
Directs users to a troubleshooting chart and provides contact information for technical support.
Lists common symptoms, their solutions, and the applicable device types for troubleshooting.
Power| operating range | DC 12V 500mA max |
|---|
Operating Environment| maximum ambient temperature | 113° F (45°C) |
|---|
Weight and Dimensions| length | 19 in (482 mm) |
|---|---|
| width | 3.5 in (89 mm) |
| height | 3.5 in (89 mm) |
| weight | 3.9 lbs (1.78 kg) |
