CHCNAV APACHE 3 - Software Operation for the USV System; Install the software; Configure computer IP

APACHE 3 User Guide (Network Bridge Version)| 2021-02 P a g e
|
14
3 Software Operation for the USV System
3.1 Install the software
There are two software for the USV system, AutoPlanner and HydroSurvey.
1) When installing the AutoPlanner software, double-click the installation package,
click Next until the installation driver and plug-in interface appears, tick ‘Install Tap
Driver’ and ‘Install Ezopen Plugin’, and then click Next until the installation is OK.
Figure 3-1 Install the software
2) When installing the HydroSurvey software, double-click the installation package
and click Next until the installation is complete.
3.2 AP Software Configurations
3.2.1 Configure the computer IP
Figure 3-2 Configure the computer IP