Check Point Smart-1 205

Need help?

Do you have a question about the Check Point Smart-1 205 and is the answer not in the manual?

Summary

Safety and Environmental Notices

General Safety Warnings and Precautions

Key warnings for appliance handling, air vents, and static discharge.

Rack Mounting Safety and Guidelines

Instructions and considerations for safely installing the appliance in a rack.

Mounting Smart-1 205 and Smart-1 210 in a Rack

Safety Instructions

Guidelines for safe installation of the appliance in a rack.

Installing the Appliance in the Rack

Procedures for physically installing the appliance into a rack.

Configuring Smart-1 Appliances

Starting the Appliance

Steps to power on and initialize the appliance.

Initial Configuration

Guide to the initial setup process using the First Time Configuration Wizard.

Configuring SmartEvent

Preparing SmartEvent in the Security Management Server Environment

Steps to prepare SmartEvent within a Security Management Server.

Preparing SmartEvent in the Multi-Domain Server Environment

Steps to prepare SmartEvent within a Multi-Domain Server environment.

Configuring SmartReporter

Preparing SmartReporter in the Security Management Server Environment

Steps to prepare SmartReporter within a Security Management Server.

Preparing SmartReporter in the Multi-Domain Server Environment

Steps to prepare SmartReporter within a Multi-Domain Server environment.

Smart-1 Appliances Hardware

Using the LCD Panel and Buttons

Explains how to navigate menus and perform operations using the LCD screen.

Hardware Diagnostic Tool and Restoring Factory Defaults

Running the Diagnostic Tool

Restoring Factory Defaults

Compliance Information

Declaration of Conformity

FCC Notice (US)