Checkpoint P30 - PV 2000; Possible Alarm Causes

PV2000
1. If it doesn’t beep when turned on, the battery may
need to be replaced.
2. If the AMBER light is seen, this indicates a low battery
and the battery should be changed at this time.
PossibleAlarmCauses
A false alarm occurs when a pedestal alarms or illuminates when someone passes through the system
after tags on the merchandise have been deactivated and/or removed. Review the following
suggestions to troubleshoot:
Q: Didyoudouble‐checkthemerchandisefortags?
A:Re‐runthemerchandiseoverthedeactivationpadorcheckformissedhardtags.
Q: Doesthealarmsoundatthedoorwayafterasofttaghasbeenpassedoverthedeactivation
pad?
A:Looktoseeifthedeactivationsystemispowered.
Experiencehasshownthatotherpossiblecausescanbe:
•Metalracks/weeklymagazine/circularracks
•Doors/doorframes
• Theuppertracksofslidingdoors
• Manualdoorsarelooseorpushbarsarenotinsulated
•ShoppingCarts
• Metalcartspushedtogether
• Cartcorralrailingsloose
•Cables/extensioncords
• Seasonallightsortreedecorations
orexcessCCTVcabling
• Va cuumcleaners
32