Chef's Choice 645 - Vari Tilt Feature; Safety Switch Operation

4
Introduction
The Chef’sChoice
®
professional electric food slicer comes equipped with a specially designed multi-purpose blade for
slicing a large variety of foods including bread, meat, cheese, vegetables and fruits.
VariTilt
®
Feature
The Model 645 operates in either the upright position which is ideal for slicing meats and cheese or tilts the carriage
a full 30° into true “gravity feed” position for effortless slicing of breads, vegetables and fruits. Changing position of
the slicer is fast and simple:
• Tochangefrom“upright”positionto“gravityfeed”(Figure1and2):
1. Press the release button located on the back side of the motor housing beneath the food carriage track.
2. When the slicer releases from the base, lightly lift it until it comes to a stop, then rotate the lock lever on the
side of the motor housing, upwards into a vertical position until it clicks into place. The slicer can now operate
in the “gravity feed” mode.
• Toreturntheslicerintothe“upright”position:
1. Support the slicer with the left hand under the food carriage. With the right hand, rotate the lock lever
downward into the horizontal position.
2. Lower the slicer until it seats on the base plate.
3. Press down firmly on the front of the carriage track so the slicer clicks into position. The slicer will now operate in
the “upright” position.
Safety Switch
The Chef’sChoice
®
professionalelectricfoodslicerisprovidedwithachildsafetyswitch(11)showninFigure3,to
reduce the risk of accidentally turning on the slicer.
• WhenthissafetyswitchisinPositionAtheslicerwillnotoperate.
• WhenthissafetyswitchisinPositionBtheslicercanbeoperatednormally.
Thesafetyswitchisdesignedtodisabletheoperationoftheautomaticon/offswitch(4).
Figure 1. Figure 2.
Release Button
Base Plate
Lock
Lever
Figure 3.
A B
➙
➙