CLEANING YOUR MULTI-COOKER
To keep your Multi-Cooker in great shape for years to come, follow these guidelines for the best
ways to clean and store the appliance.
1. Clean the Multi-Cooker after every use.
2. Unplug the appliance and let it cool down completely before cleaning.
3. Remove the cooking pot, and wash it in warm soapy water with a non-abrasive sponge.
4. Rinse and dry thoroughly, then replace it into the main unit.
5. Clean the lid with detergent and rinse with fresh water.
6. Wipe all parts dry with a soft cloth.
7. Wipe the housing with a moistened cloth. Ensure that no water can enter the housing. Wipe
the housing dry with a soft cloth.
This appliance has no user serviceable parts. Any servicing beyond that described in the
Cleaning Section should be performed by an Authorized Service Representative only.
See warranty available online.
STORING YOUR MULTI-COOKER
1. Always unplug the removable power cord and allow the Multi-Cooker to cool down before
storage.
2. Place the accessories (i.e., frying basket, steam rack, and slotted spoons) inside the cooking
pot.
3. Always store the Multi-Cooker in an upright position.
4. Do not place anything on top of the Multi-Cooker.
English - 10
TROUBLESHOOTING
Subject Question Solution
Timer Timer is not counting down
even though Multi-Cooker
has reached the cooking
time.
Timer may be moving slowly, check
progress after 5 minutes. If timer
is not moving after 5 minutes, then
timer may be broken. Unplug unit
from wall and wait for it to cool
down and/or release the steam
before opening.
“HOT” display “HOT” will display on the
screen if the multi-cooker
is too hot when the Steam
function is selected.
Unplug the power cord from the
power source, then plug it in
again or press “Start/Cancel” for 3
seconds to standby status. Wait for
the appliance to cool down. When
the appliance is cold, the “HOT”
message will disappear.
To Next Page
Loading...
