Ventilation and A/C system
73
Temperature control
switch
Temperature control switch is used to
control the air temperature of ventilation
opening.
Blue position: Cold
Red position: Hot
Blower motor switch
Blower motor switch is used to control
blower motor speed (four positions in all).
Blower regulates wind speed. Blower
may be turned on to improve comfort
during driving.
Internal and external
circulation control lever
It is used to select exterior fresh air or
interior circulating air.
Outer circulation mode ( )
Allow outer air get into vehicle.
Used for normal ventilation, heating and
cooling.
Internal circulation mode ( )
It is used when a internal circulation is
needed for the air in vehicle. This mode
is used to prevent outside waste gas from
getting into vehicle especially in dusty
environment, it is also applied when fast
cooling or heating of interior air is
requested.
！Notice
Continuous application of internal
circulation mode will cause interior
mugginess and fog on glass, So internal
circulation mode could not be engaged
for a little while.
To Next Page
Loading...
