Chery TIGGO - Page 96

Blower Control
Use this control to
regulate the amount
of air forced through
the ventilation sys-
tem in any mode.
The blower speed
increases as the
control is moved to the right from the
OFF position. There are four blower
speeds.
Temperature Control
Use this control to
regulate the tem-
perature of the air in-
side the passenger
compartment. The
blue area of the scale
indicates cooler tem-
peratures; the red area indicates
warmer temperatures.
Mode Control (Air Direction)
Use this control to
choose from several
patterns of air distri-
bution.
Panel
Airflow is directed through the
outlets in the instrument panel.
These outlets can be adjusted to
direct airflow.
Bi-Level
Airflow is directed through the
instrument panel and floor out-
lets.
Floor
Airflow is directed through the
floor outlets with a small
amount flowing through the de-
frost and side window defog outlets.
Mix
Airflow is directed through the
floor, defrost, and side window
defog outlets. This setting
works best in cold or snowy conditions
that require extra heat to the wind-
shield. This setting is good for main-
taining comfort while reducing mois-
ture on the windshield.
Defrost
Airflow is directed through the
outlets for the windshield and
side window defrosters. Use
this mode with maximum blower and
temperature settings for best wind-
shield and side window defrosting.
YOUR INSTRUMENT PANEL – 95
Chery Automobile Co., Ltd.