Chevrolet Aveo 2016 - Cassette Tape Player

Instrumentation and Controls
. . . 70
3. The radio will automatically
search the band and store the
six radio stations with the
strongest reception on preset
buttons 1 through 6 in the
selected autostore band (FM-A
or AM-A).
As a station is stored, its
frequency will temporarily
flash on the display.
4. Once the stations are stored,
the radio will switch to FM-A
and the first preset station will
begin to play.
FM-A will appear on the
display when you are listening
to the autostore stations.
Press AM  or FM  to cancel this
feature.
Cassette Tape Player
Insert the cassette with the tape
visible to the right.
LOAD will appear on the display.
PLAY will appear when a tape is
active.
Press AM  or FM  to stop
playing a cassette and switch to
the radio.
Fast Forwarding
Press the up arrow on the TUNE
switch  to move quickly ahead to
another part of the tape.
FF will appear on the display.
Rewinding
Press the down arrow on the
TUNE switch  to move quickly
back to another part of the tape.
REW will appear on the display.
Seeking
Press the up arrow on the SEEK
switch  to move quickly to the
beginning of the next selection.
A-FF will appear on the display.
Press the down arrow on the SEEK
switch  to move quickly to the
beginning of the current selection.
A-REW will appear on the display.
Cassette Tape: Switching Sides
When listening to a cassette tape,
press TAPE  to switch to the
other side.
09Aveo_T255_GenR.fm Page 70 Wednesday, February 13, 2008 1:49 PM
71 . . .
–
Section 1
Dolby
®
-B Noise Reduction
To reduce background noise on
Dolby encoded tapes, press
(push-button 1).
Manufactured under license from
Dolby Laboratories. "Dolby"
and the double-D symbol are
trademarks of Dolby Laboratories.
Tape Eject Button
Press  (located next to the
cassette tape slot) to eject the
tape.
AF (area frequency) Code
If battery power is interrupted, you
will need to enter a code into the
audio system to select the proper
radio frequency intervals for your
region.
Use the following chart to select
the appropriate code for your
region:
Region Code
Europe 2
Latin America 3
Middle East 4
Oceania 4
To enter the AF code:
1. Turn the audio system on.
AF- will appear on the display.
2. Enter the AF (area frequency)
code into the unit using the
preset buttons.
The preset FM radio frequency
will appear on the display.
09Aveo_T255_GenR.fm Page 71 Wednesday, February 13, 2008 1:49 PM