Chevrolet CAPTIVA User Manual

6. Install the new bulb into the bulb
socket.
7. Turn the bulb socket clockwise to
reinstall.
8. Install the lamp assembly into the
vehicle. Make sure to align the
retaining studs to the grommets.
9. Install two screws to secure lamp
assembly in place on the vehicle.
SIDE TURN SIGNAL LAMPS
If the side turn signal lamp in the
outside rearview mirror is not operated,
have the checked by CHEVROLET
retailer.
CENTER HIGH-MOUNTED
STOPLAMP (CHMSL)
If the CHMSL is not operated, have the
checked by CHEVROLET retailer.
LICENSE PLATE LAMP
The licence plate lamps for this vehicle
are on the trunk lid.
To replace one of these bulbs:
1. Open the tailgate. See Tailgate on
page 1-7.
2. Remove two screws and the lamp
assembly.
3. Turn the bulb socket counterclock-
wise to remove it from the lamp
assembly.
4. Pull the bulb straight out of the bulb
socket.
Vehicle Care 9-35
TAIL LAMPS AND STOP
LAMPS (LED)
Have the LED lamps inspected and
replaced by CHEVROLET retailer.
REAR FOG LAMPS (LED)
Have the LED lamps inspected and
replaced by CHEVROLET retailer.

Chevrolet CAPTIVA Specifications

General

Brand	Chevrolet
Model	CAPTIVA
Category	Automobile
Language	English