•
2001
Chevrolet Corvette Restoration Kit
driveline support assembly. The mounting system utilized for the shift control (1) incorporates rubber
insulators. The cockpit
of
the vehicle
is
isolated from the driveline through the use
of
a shift control
closeout boot which seals off the shift control and the
driveline tunnel shift control opening.
Gear
Select (Skip Shift)
To ensure good fuel economy and compliance with federal fuel economy standards, SECOND and
THIRD gears are inhibited when shifting out
of
FIRST gear under the following conditions:
• Coolant temperature
is
above 50°C (122°F).
• Vehicle speed is between 20 and 29 km/h (12 and 19 mph).
• Throttle
is
opened 35 percent or less.
Reverse Lockout
A reverse lockout system (consisting
of
a reverse lockout solenoid which operates a reverse lockout
mechanism)
is
utilized to prevent shifting into REVERSE gear when the vehicle is moving forward at a
speed
of
5 km/h (3 mph) or more.
Automatic Transmission - 4L60E
Fastener Tightening Specifications
Page 82
To Next Page