a
(Outside Air): Slide the lower right lever
to
the
right for outside air. With the lever in this position,
outside air will circulate throughout your vehicle.
&I
(Recirculation): Slide the lower right lever to the
left for recirculated air. With the lever in this position
outside air and odors can be prevented from entering
your vehicle and also helps heat or cool the air
inside your vehicle more quickly.
If
the lever is in the middle of the two positions, you will
have both outside and recirculated air inside your
vehicle.
If you are in city traffic, your vehicle is stopped and
idling or the weather is hot, the system may be switched
from the outside air mode
to
the recirculation mode.
To
help prevent the air inside of your vehicle from
becoming
too
stale, be sure to return to outside air
periodically.
Temperature Control: Slide the lever located on the
lower left side to change the temperature. Move it
to
the
right for warmer air and
to
the left for cooler air.
Without air conditioning, the air temperature cannot be
less than the outside air temperature.
AK
(Air Conditioning): Press this button
to
turn the
air-conditioning system on or off. When
NC
is pressed,
an indicator light in the button will come on
to
let you
know that the air conditioning is activated.
On hot days, open the windows
to
let hot inside air
escape; then close them. This helps
to
reduce the time
it takes for your vehicle
to
cool down.
It
also helps
the system
to
operate more efficiently.
For quick cool down on hot days:
1.
Select the vent mode.
2.
Select the recirculation mode.
3.
Select
NC.
4.
Select the coolest temperature.
5.
Select the highest fan speed.
The air-conditioning system removes moisture from the
air,
so
you may sometimes notice a small amount of
water dripping underneath your vehicle while idling
or after turning
off
the engine. This is normal.
3-1
9
To Next Page
Loading...
