Front Turn Signal and Parking
Lamps
To
replace the parking and turn signal bulb, do the
following:
1.
See “Headlamps” for location.
Sidemarker Lamps
To replace the sidemarker bulb, do the following:
2.
Locate the turn signal bulb.
3.
Turn the bulb socket counterclockwise and pull it
out of the lamp housing.
4.
Push the bulb
in,
turn it counterclockwise and pull
the bulb straight out of the socket.
5.
Reverse the steps to install a new bulb.
1.
Remove the two screws
holding the sidemarker
lamp assembly. The
assembly should
pull away from the
vehicle.
2.
Turn the socket counterclockwise and pull
it
out of
the housing.
3.
Pull the bulb out of the socket.
4.
Reverse the steps
to
install
a
new bulb.
5-56
To Next Page
Loading...
