How
to Add Fluid
Here’s how to add fluid. Refer
to
the Maintenance
Schedule to determine what kind of fluid to use. See
Part
D:
Recommended Fluids and Lubricants
on
page
6-30.
1.
Remove the filler plug.
2.
Remove the drain plug, drain the fluid and reinstall
3.
Add fluid at the filler plug hole. Add only enough
the drain plug.
fluid to bring the fluid level up to the bottom of the
filler plug hole.
seated.
4.
Reinstall the filler plug. Be sure the plug is fully
Hydraulic Clutch
It is not necessary to regularly check clutch fluid unless
you suspect there is a leak in the system. Adding
fluid won’t correct a leak.
A fluid
loss
in this system could indicate a problem.
Have the system inspected and repaired.
When to Check and What to Use
Refer
to
the Maintenance Schedule
to
determine how
often you should check the fluid level in your clutch
master cylinder reservoir and for the proper fluid. See
Part
B:
Owner Checks and Services on page
6-24
and
Part
D:
Recommended Fluids and Lubricants
on
page
6-30.
5-27
To Next Page
Loading...
