3.
Install the lower filter by dropping it down into
the
slot.
The grooves on the two filters
must
be lined up with
each other as well as with the ventilation housing in
order
to
install the filters properly. The tabs
on
the
filters should face outward towards you and should
be
at
the top of the filters. The arrows on the filters
should point to the driver’s side of the vehicle.
4.
Then line
up
the grooves
of
the second filter with the
5.
Reverse the steps
to
remove the air filters and then
Once you remove the filter,
if
you choose not
to
replace
it, it
will not damage your vehicle. However, the air
will no longer be filtered.
lower one and slide
it
in on top of the lower one.
install new ones.
3-24
To Next Page
Loading...
