3.
4.
5.
Fill the radiator with the proper coolant mixture, up
to
the base of the filler neck. See
Engine Coolant
on page
5-28
for more information about the proper
coolant mixture.
Then
fill
the coolant recovery tank
to
the
FULL
mark.
Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap
off.
6.
7.
Start the engine and let it run until you can feel the
upper radiator hose getting
hot.
Watch out for the
engine cooling fan.
By this time, the coolant level inside the radiator
filler neck may be lower.
If
the level is lower, add
more of the proper coolant mixture through the
filler neck until the level reaches the base of the
filler neck.
5-38
To Next Page
Loading...
