Shoulder Belt Height Adjuster
Before you begin
to
drive, move the shoulder belt
adjuster
to
the height that is right for you.
To
move it down, pull the knob and move the height
adjuster to the desired position. You can move the
adjuster up just by pulling out the knob and sliding the
adjuster up. After you move the adjuster
to
where
you want it, try to move it down without pulling out the
knob
to
make sure it has locked into position.
Adjust the height
so
that the shoulder portion of the belt
is
centered on your shoulder. The belt should be
away from your face
and
neck, but not falling
off
your
shoulder.
1-18
To Next Page
Loading...
