EasyManua.ls Logo

Chevrolet Trax - Starting the Engine; Driving and Operating; Ignition Positions

Chevrolet Trax
326 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
198 Driving and operating
Ignition positions
MD097
0(LOCK): Ignition off
1(ACC): Ignition off, steering wheel
lock released
2(ON): Ignition on, preheating for
diesel engine
3(START): Starting
Starting the engine
Starting engine with the
ignition switch
MD098
Turn the key to position 1, move
the steering wheel slightly to
release the steering wheel lock.
Manual transmission: Operate
clutch.
Automatic transmission : Move
selector lever to P or N.
Do not accelerate.
{Danger
Do not turn the key to 0 or 1
position while driving.
Vehicle and brake assistance
would not operate, causing vehicle
damage, personal injury or
possibly death.
Caution
Do not leave the key in 1 or 2
position for extended periods while
the engine is not running.
This will discharge the battery.

Table of Contents