Driving and operating 201
Restart of the engine by the
driver
Depress the clutch pedal to restart
the engine.
The engine start is indicated by the
needle on the idle speed position in
the tachometer.
If the selector lever is shifted out of N
before depressing the clutch first, #
illuminates.
The indicator is goes out as soon as
the clutch pedal is depressed.
Restart of the engine by the
stop-start system
If one of the following conditions
occurs during engine stop, the
engine will be restarted automatically
by the stop-start system.
The stop-start system is manually
deactivated
The hood is opened
The driver's safety belt is
unfastened and the driver's door
is opened
The engine temperature is too
low
The battery is low
The brake vacuum is not
sufficient
The vehicle starts to move
The defrosting function is
activated
The climate control system
requests an engine start
Parking
Do not park the vehicle on an
easily ignitable surface. The high
temperature of the exhaust
system could ignite the surface.
Always apply parking brake
without pressing release button.
Apply as firmly as possible on
downhill or uphill slopes. Depress
the footbrake at the same time to
reduce operating force.
Switch off the engine and ignition.
Turn the steering wheel until the
steering wheel lock engages.
If the vehicle is on a level surface
or uphill slope, engage first gear
or "P" position before switching
off the ignition. On an uphill
slope, turn the front wheels away
from the kerb.
If the vehicle is on a downhill
slope, engage reverse gear
before switching off the ignition.
Turn the front wheels towards the
kerb.
To Next Page