SKU 3633 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number on
the inside of the front cover. Keep this manual and invoice in a safe and dry place
for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5. USE EYE PROTECTION. Wear ANSI approved safety impact eye goggles when
assembling and using this product. ANSI approved safety impact eye goggles
are available from Harbor Freight Tools.
metInoitpircseD
yticapaClluPeniLmumixaM )eniLelgniS(.sbL000,9
stnemeriuqeRlacirtcelECDtloV21
serutaeFgniloopSeerF
ekarBgnidloHdaoL,citamotuA
metsySraeGyratenalPegatS3
snoitarepOtuOrewoP/nIrewoP
elbaC'21htiwlortnoCetomeRdleHdnaH
daelriaFrelloReswaH
kooHhtiwelbaCtfarcriA,dezinavlaG,"8/3,'001
nrettaPgnitnuoM"5.4x"01
thgieWsdnuoP7.97
Brought to You by Augusta Flint
To Next Page
Loading...